Page 95

Technical Dayta Sheet Compedium

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING JOINT FILLERS WATERPROOFING WATERSTOPS ROOFING TIMBER FLOORING ALPHABETICAL INDEX Important notice A Safety Data Sheet (SDS) and Technical Data Sheet (TDS) are available from the Parchem website or upon request from the nearest Parchem sales office. Read the SDS and TDS carefully prior to use as application or performance data may change from time to time. In emergency, contact any Poisons Information Centre (phone 13 11 26 within Australia) or a doctor for advice. Product disclaimer This Technical Data Sheet (TDS) summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. You should read this TDS carefully and consider the information in the context of how the product will be used, including in conjunction with any other product and the type of surfaces to, and the manner in which, the product will be applied. Our responsibility for products sold is subject to our standard terms and conditions of sale. Parchem does not accept any liability either directly or indirectly for any losses suffered in connection with the use or application of the product whether or not in accordance with any advice, specification, recommendation or information given by it. Page 2 83 *Manufactured and sold under license from Fosroc International Limited. Fosroc and the Fosroc logo are trade marks of Fosroc International Limited, used under license. *Denotes a trade mark of Fosroc International Limited. Parchem Construction Supplies Pty Ltd 7 Lucca Road, Wyong NSW 2259 Phone: 1300 737 787 www.parchem.com.au ABN 80 069 961 968 Distributed in New Zealand by: Concrete Plus Ltd 23 Watts Rd, Sockburn 8042 Ph: 03 343 0090 as soon as the first coat is fully dry (generally between 30 minutes and 1 hour). The primed surfaces should not be left exposed to the elements for longer than necessary before overcoating or application of the repair material. Nitoprime Zincrich will, however, protect steel under clean interior exposure conditions for a period of several months. In non-aggressive exterior environments, a maximum interval of 14 days will be tolerated but in industrial and/or marine environments this interval should be reduced to the practical minimum. The application of concrete repair materials should proceed as soon as the Nitoprime Zincrich is fully dry (generally 30 minutes to 1 hour - see under Properties). Low temperature working The minimum application temperature is 5°C. The material should not be applied when the substrate and/or air temperature is 5°C and falling. At 5°C static temperature or at 5°C and rising, the application may proceed. Cleaning Remove material from tools, equipment and mixers with Solvent 10 immediately after use. Limitations Nitoprime Zincrich should not be applied when the temperature is below 5°C or is 5°C and falling. If any doubts arise concerning temperature or application conditions, consult the local Parchem sales office. Estimating Supply Nitoprime Zincrich: 1 litre can Solvent 10: 4 and 20 litre cans Product Code 322100 Nitoprime Zincrich 1L Coverage Nitoprime Zincrich: 8 m²/litre (approx.) Note: this coverage figure is theoretical - due to wastage actors and the variety and nature of possible steel substrates, practical coverage figures will be reduced. Storage Shelf life 12 months if kept in dry store in original, unopened packs. Storage conditions Store in dry conditions in the original containers. If stored at high temperatures and/or high humidity conditions the shelf life may be reduced. Fosroc® Nitoprime Zincrich


Technical Dayta Sheet Compedium
To see the actual publication please follow the link above