CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING JOINT FILLERS WATERPROOFING WATERSTOPS ROOFING TIMBER FLOORING ALPHABETICAL INDEX Important notice A Safety Data Sheet (SDS) and Technical Data Sheet (TDS) are available from the Parchem website or upon request from the nearest Parchem sales office. Read the SDS and TDS carefully prior to use as application or performance data may change from time to time. In emergency, contact any Poisons Information Centre (phone 13 11 26 within Australia) or a doctor for advice. Product disclaimer This Technical Data Sheet (TDS) summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. You should read this TDS carefully and consider the information in the context of how the product will be used, including in conjunction with any other product and the type of surfaces to, and the manner in which, the product will be applied. Our responsibility for products sold is subject to our standard terms and conditions of sale. Parchem does not accept any liability either directly or indirectly for any losses suffered in connection with the use or application of the product whether or not in accordance with any advice, specification, recommendation or information given by it. Parchem Construction Supplies Pty Ltd 7 Lucca Road, Wyong NSW 2259 Phone: 1300 737 787 www.parchem.com.au ABN 80 069 961 968 Distributed in New Zealand by: Concrete Plus Ltd 23 Watts Rd, Sockburn 8042 Ph: 03 343 0090 Page 2 55 Concrete Fibre Spacers There are two main grades of concrete fibre spacers, standard and premium grade. Parchem stock mostly the premium grade. The performance characteristics of the two types are given below. Material quality Standard *Premium Concrete cover mm 15 - 100* 20 - 100* Load-bearing capacity KN > 3 > 3 Performance Class Heavy Heavy Compressive strength MPa 50 60 and above Permitted tolerances mm ±1 ** ±1 ** Water absorption after 30 min % < 3 < 2 Exposure Class EN 206-1 up to X0, XC3, XD2, XS2, XF2, XA2 DC2 BS8500/EN206 up to A, B1 AS/NZ3600 up to X0, XC4, XD3, XS3, XF4, XA DC4 A, B, C, U Fire resistance classification EN 13501-1:2002 A1 - not flammable A1 - not flammable I.S.A.T. (after 10 minutes) ml/m²/min < 0.5 < 0.25 Chloride diffusion m²/sec x 10-12 < 5.0 < 1.0 Contact adhesion MPa 0.4 0.4 *The premium grade concrete fibre spacers comply with Queensland Main Road specification MRTS70 (11/09). Please note only certain shapes are approved for use. Please contact your local Parchem office for more information.
Technical Dayta Sheet Compedium
To see the actual publication please follow the link above