Page 587

Technical Dayta Sheet Compedium

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING JOINT FILLERS WATERPROOFING WATERSTOPS ROOFING TIMBER FLOORING ALPHABETICAL INDEX 575 Technical Data Sheet V 1.0 17-06-13 Point Works GEN II Retardant Spray Skin Time Retardant Spray for Point Works Gen II Description Selleys Point Works Gen II Retardant Spray is specifically formulated to increase the time for Point Works Gen II flexible roof pointing to form a skin on the surface. It is available in a 750mL trigger bottle. Uses  Selleys Point Works Gen II Retardant Spray is recommended for use in hot and windy conditions where skinning of the Point Works Gen II may be a problem. Features/Advantages  The application of the retardant spray will extend the skinning time of Point Works Gen II by approximately 20 minutes (depending on ambient conditions).  It may be used to retard surface skinning of Point Works Gen II in the bucket, or after the pointing has been applied. Instructions for Use/Application Instructions The following should only be used as a guide and the installer should apply all Australian Standards, BCA/NZBC requirements, and best practices when pointing roofs with Point Works Gen II.  Spray should be applied before Point Works Gen II has skinned over (usually within 10 minutes of opening the bucket or applying the pointing to the roof).  Use the “spray” setting to apply Point Works Gen II Retardant Spray to the surface of before Point Works Gen II before it has skinned over.  Do not use a “stream” setting as the jet may wash out the pointing  Use as required in order to slow down skinning in the bucket, or as a tooling aid.  Spray from a distance of approximately 20 centimetres to ensure an even coverage. Technical Data/Properties Contact Selleys before using this data for the setting of specifications. Property Typical Result Shelf Life 24 months VOC 0 g/L Important Notes/Limitations  Point Works Gen II Retardant Spray should be used as supplied. Do not dilute with water.  Do not use Point Works Gen II Retardant Spray if rain is likely. Storage Store unopened bottles below 300C in a cool dry place away from direct sunlight. Unopened bottles can be stored for 24 months from the date of manufacture. Safety No special personal protective equipment required. Wash hands after use. Rubber gloves are recommended if handling often. Not classified as Dangerous Goods. Not classified as Hazardous. Refer to Safety Data Sheet for more detailed information. www.selleystrade.com.au Page 1 of 2


Technical Dayta Sheet Compedium
To see the actual publication please follow the link above