Page 553

Technical Dayta Sheet Compedium

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING JOINT FILLERS WATERPROOFING WATERSTOPS ROOFING TIMBER FLOORING ALPHABETICAL INDEX Important notice A Safety Data Sheet (SDS) and Technical Data Sheet (TDS) are available from the Parchem website or upon request from the nearest Parchem sales office. Read the SDS and TDS carefully prior to use as application or performance data may change from time to time. In emergency, contact any Poisons Information Centre (phone 13 11 26 within Australia) or a doctor for advice. Product disclaimer This Technical Data Sheet (TDS) summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. You should read this TDS carefully and consider the information in the context of how the product will be used, including in conjunction with any other product and the type of surfaces to, and the manner in which, the product will be applied. Our responsibility for products sold is subject to our standard terms and conditions of sale. Parchem does not accept any liability either directly or indirectly for any losses suffered in connection with the use or application of the product whether or not in accordance with any advice, specification, recommendation or information given by it. Parchem Construction Supplies Pty Ltd 7 Lucca Road, Wyong NSW 2259 Phone: 1300 737 787 www.parchem.com.au ABN 80 069 961 968 Distributed in New Zealand by: Concrete Plus Ltd 23 Watts Rd, Sockburn 8042 Ph: 03 343 0090 Page 2 541 Emer-Proof® Drain V Application Instructions Laying instructions Emer-Proof Drain V is laid after having positioned a uniform and complete bituminous waterproofing layer on the foundation wall. Unroll Emer-Proof Drain V along the same wall, making sure that the fabric side of the membrane faces the ground, up to the foundation foot, and leaving at least 40 cm of Emer-Proof Drain V beyond the same foot. Lay a bed of draining material on the foundation surface in support of the water discharge pipe, positioning it on top of the final portion of the Emer-Proof Drain V. Fix the top portion of the membrane using the nails supplied with the same membrane at an interval of 50 cm at the most. Then position the plastic closing profile at the top of the membrane, fastening it to the reinforced concrete wall using steel nails. Continue along all the foundation walls. After that, fix the Emer-Proof Drain V using the relevant fixing kit (plastic plugs with washer) after having drilled holes in the wall, creating an anchoring mesh of 1x1 m, also including the vertical overlappings that must be at least 20 cm wide. For improved protection, position a bituminous adhesive strip (Emer-Proof HDPE) between the two overlapping edges of the Emer-Proof Drain V. After completing the fixing operations, proceed with the backfill, being careful to carry it out in uniform layers. Estimating Supply Emer-Proof Drain V: 2 x 20 m roll Coverage Emer-Proof Drain V: 40 m² per roll


Technical Dayta Sheet Compedium
To see the actual publication please follow the link above