Page 513

Technical Dayta Sheet Compedium

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING JOINT FILLERS WATERPROOFING WATERSTOPS ROOFING TIMBER FLOORING ALPHABETICAL INDEX Technical Data Sheet resistance to puncture and piercing. The top face of Testudo 30 is coated with a uniformly distributed, fine, serigraphed talc, a patented treatment. This enables quick unrolling and installation of the membrane with reliable and fast welding of the joints. The underside of the membrane is coated with Flamina and embossing. The Flamina is a plastic film that melts when torched. The embossing maintains the pre-tension and optimal retraction of the film and allows the torch a greater surface area for faster and more reliable installation. Technical support Parchem offers a technical support package to specifiers, end-users and contractors, as well as on-site technical assistance. 501 Index® Testudo 30 Torch applied 5 mm thick high performance reinforced elastoplastomeric polymer – bitumen bridge deck waterproofing membrane Uses Testudo 30 membrane is characterised by a high resistance to puncture and is therefore particularly suitable for single layer waterproofing systems where high mechanical resistance is required, such as: „ Bridge decks „ Road ways „ Viaducts „ Carparks „ Foundations „ Earthquake-proof foundations „ Subways „ Tunnels Advantages „ Index membranes have over 25 years of proven performance throughout Australia „ Specifically selected for Australian conditions „ Low VOC - 7 grams per Litre „ Handles ponding and permanently wet conditions „ No curing times. Instantly waterproof „ Uniform thickness – eliminating likelihood of uneven application possible with liquid applied membranes „ 300 gram non-woven single strand spunbond polyester fabric reinforcement „ Excellent stability at both high and low temperatures „ Has excellent durability and flexibility „ Testudo 30 conforms to the Italian Motorways Company’s specification Description Testudo 30 is manufactured from distilled bitumen, selected for industrial use, with a high content of elastomeric and plastomeric polymer additives to obtain a phase inversion compound. The performance of the compound is therefore incremented along with the durability and the resistance to high and low temperatures while the already optimum adhesive and impermeable qualities of the bitumen remain unchanged. Testudo 30 is reinforced with a high weight (300 gm), isotropic, thermally fixed, rot-proof, non-woven single strand spunbond polyester fabric. This ensures a very strong membrane with notable ultimate elongation and an optimal June 2014 Page 1 Polymer-bitumen and embossed Flamina 300g ‘non-woven’ polyester fabric Polymer-bitumen coating with talcing Testudo 30: 5 mm plain membrane Properties Product Code: 742046 Reinforcement: “Non woven” spunbond polyester fabric: Flow resistance at elevated temperature (EN 1110): 120°C Tensile strength (EN 12311-1): longitudinal: 1100 N/50mm transverse: 1000 N/50 mm Ultimate elongation: longitudinal: 50 % transverse: 50 % Shear resistance: longitudinal: 500 N/50 mm transverse: 500 N/50 mm Resistance to tearing (EN 12310-1): longitudinal: 250 N transverse: 250 N Impermeability to water (EN1928 B method): 60 kPa Flexibility at low temperature (EN 1109): -15°C Maintenance No special requirements necessary. Any damage identified during normal inspections should be repaired or replaced as appropriate. June 2014


Technical Dayta Sheet Compedium
To see the actual publication please follow the link above