Page 512

Technical Dayta Sheet Compedium

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING ROOFING WATERSTOPS WATERPROOFING JOINT FILLERS TIMBER FLOORING ALPHABETICAL Important notice A Safety Data Sheet (SDS) and Technical Data Sheet (TDS) are available from the Parchem website or upon request from the nearest Parchem sales office. Read the SDS and TDS carefully prior to use as application or performance data may change from time to time. In emergency, contact any Poisons Information Centre (phone 13 11 26 within Australia) or a doctor for advice. Product disclaimer This Technical Data Sheet (TDS) summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. You should read this TDS carefully and consider the information in the context of how the product will be used, including in conjunction with any other product and the type of surfaces to, and the manner in which, the product will be applied. Our responsibility for products sold is subject to our standard terms and conditions of sale. Parchem does not accept any liability either directly or indirectly for any losses suffered in connection with the use or application of the product whether or not in accordance with any advice, specification, recommendation or information given by it. INDEX 500 Page 3 Parchem Construction Supplies Pty Ltd 7 Lucca Road, Wyong NSW 2259 Phone: 1300 737 787 www.parchem.com.au ABN 80 069 961 968 Distributed in New Zealand by: Concrete Plus Ltd 23 Watts Rd, Sockburn 8042 Ph: 03 343 0090 Index® Rollbase The following layers shall be installed by the torch method of application. For more detailed specification information contact your local Parchem sales office. Protection Rollbase is not designed as a stand alone membrane and must have additional layers of membrane applied. If the final membrane is to be exposed to UV, a mineral finish is required - such as Sirio Mineral or Testudo Mineral. Supply Rollbase: 1 m wide rolls, 10 m long Product Code: 742010 Coverage Adhesive A901: 2 - 5 m² per litre depending on porosity of substrate Product Code: 900006 Note: no allowance has been made for wastage. Storage conditions Store in cool, dry conditions ie. not exceeding 25°C. Rolls must be stored on end and must NOT be stored lying down.


Technical Dayta Sheet Compedium
To see the actual publication please follow the link above