Page 504

Technical Dayta Sheet Compedium

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING ROOFING WATERSTOPS WATERPROOFING JOINT FILLERS TIMBER FLOORING ALPHABETICAL Important notice A Safety Data Sheet (SDS) and Technical Data Sheet (TDS) are available from the Parchem website or upon request from the nearest Parchem sales office. Read the SDS and TDS carefully prior to use as application or performance data may change from time to time. In emergency, contact any Poisons Information Centre (phone 13 11 26 within Australia) or a doctor for advice. Product disclaimer This Technical Data Sheet (TDS) summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. You should read this TDS carefully and consider the information in the context of how the product will be used, including in conjunction with any other product and the type of surfaces to, and the manner in which, the product will be applied. Our responsibility for products sold is subject to our standard terms and conditions of sale. Parchem does not accept any liability either directly or indirectly for any losses suffered in connection with the use or application of the product whether or not in accordance with any advice, specification, recommendation or information given by it. INDEX 492 Page 3 Parchem Construction Supplies Pty Ltd 7 Lucca Road, Wyong NSW 2259 Phone: 1300 737 787 www.parchem.com.au ABN 80 069 961 968 Distributed in New Zealand by: Concrete Plus Ltd 23 Watts Rd, Sockburn 8042 Ph: 03 343 0090 On completion of the membrane installation all exposed perimeter edges must be mechanically fixed or terminated under a flashing. Protection Whilst the Modo/P membrane is based on a polymer modified bitumen which is resistant to UV, it is not recommended for long term exposure with out some form of protective topping medium. Fidia Mineral or Testudo Mineral should be used as a cap or weathering sheet for use in non-traffic / maintenance traffic areas. Where the membrane is to be back filled, such as with basement applications, the Modo/P should be protected from mechanical damage with the Emer-Proof Drain V drainage/ protection system also available from Parchem. Limitations New concrete substrates should be allowed to cure for a minimum of 28 days prior to the installation. Supply Modo/P: Product Code: 742015 1 m wide rolls, 10m long Index Bitumen Primer: Product Code: 742105 8m² per litre Emer-Proof Drain V: Product Code: 743072 2m x 20m roll (40m²) Note: no allowance has been made for wastage. Storage Store in cool, dry conditions ie. not exceeding 25°C. Rolls must be stored on end and must NOT be stored lying down. Index® Modo/P


Technical Dayta Sheet Compedium
To see the actual publication please follow the link above