CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING ROOFING WATERSTOPS WATERPROOFING JOINT FILLERS TIMBER FLOORING ALPHABETICAL Important notice A Safety Data Sheet (SDS) and Technical Data Sheet (TDS) are available from the Parchem website or upon request from the nearest Parchem sales office. Read the SDS and TDS carefully prior to use as application or performance data may change from time to time. In emergency, contact any Poisons Information Centre (phone 13 11 26 within Australia) or a doctor for advice. Product disclaimer This Technical Data Sheet (TDS) summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. You should read this TDS carefully and consider the information in the context of how the product will be used, including in conjunction with any other product and the type of surfaces to, and the manner in which, the product will be applied. Our responsibility for products sold is subject to our standard terms and conditions of sale. Parchem does not accept any liability either directly or indirectly for any losses suffered in connection with the use or application of the product whether or not in accordance with any advice, specification, recommendation or information given by it. INDEX 478 Page 3 Parchem Construction Supplies Pty Ltd 7 Lucca Road, Wyong NSW 2259 Phone: 1300 737 787 www.parchem.com.au ABN 80 069 961 968 Distributed in New Zealand by: Concrete Plus Ltd 23 Watts Rd, Sockburn 8042 Ph: 03 343 0090 Emer-Proof® HDPE Pipe Penetration Protection Emer-Proof HDPE is not suitable for long term exposure to UV. The membrane should therefore be protected in some way within 3 months of application. When the membrane is to be backfilled such as with basement applications, Emer- Proof HDPE should be protected from physical damage by using Emer-Proof Drain V drainage/protection system also available from Parchem. Limitations Do not apply to uncured green concrete or to concrete with high moisture content levels. In such applications blistering of membrane may occur due to vapour pressure building up at interface of membrane and the substrate. Similarly, Emer-Proof HDPE should not be applied to substrates subject to hydrostatic pressure from below the membrane. Emer-Proof HDPE must be protected from UV exposure within 3 months of application. Estimating Product code Emer-Proof HDPE: 742034 Emer-Proof Self Adhesive Primer: 742041 Supply Emer-Proof HDPE: 1 m wide, 20 m long roll Emer-Proof Primer: 20 litre pail Coverage Emer-Proof HDPE: approx. 18.9 m² / 20 m roll allowing for overlaps Emer-Proof Self Adhesive Primer: 6 - 8 m²/litre Note: No allowance has been made for wastage. Storage 12 months in cool, dry conditions i.e. not exceeding 25°C. Storage above this temperature may reduce storage life.
Technical Dayta Sheet Compedium
To see the actual publication please follow the link above