Page 402

Technical Dayta Sheet Compedium

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING ROOFING WATERSTOPS WATERPROOFING JOINT FILLERS TIMBER FLOORING ALPHABETICAL Important notice A Safety Data Sheet (SDS) and Technical Data Sheet (TDS) are available from the Parchem website or upon request from the nearest Parchem sales office. Read the SDS and TDS carefully prior to use as application or performance data may change from time to time. In emergency, contact any Poisons Information Centre (phone 13 11 26 within Australia) or a doctor for advice. Product disclaimer This Technical Data Sheet (TDS) summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. You should read this TDS carefully and consider the information in the context of how the product will be used, including in conjunction with any other product and the type of surfaces to, and the manner in which, the product will be applied. Our responsibility for products sold is subject to our standard terms and conditions of sale. Parchem does not accept any liability either directly or indirectly for any losses suffered in connection with the use or application of the product whether or not in accordance with any advice, specification, recommendation or information given by it. INDEX 390 Page 2 Parchem Construction Supplies Pty Ltd 7 Lucca Road, Wyong NSW 2259 Phone: 1300 737 787 www.parchem.com.au ABN 80 069 961 968 Distributed in New Zealand by: Concrete Plus Ltd 23 Watts Rd, Sockburn 8042 Ph: 03 343 0090 Placement of the Conwrap strip Remove release paper at the start of the roll. Place the strip in position at the crack or joint and unroll removing the release paper at the same time. Press the strip on to the concrete to form the shape of the surface and to remove any air pockets. All strips should be rolled firmly into place. Overlaps should be a minimum 50 mm. Protection before backfilling Conwrap is not suitable for long term exposure to UV. The membrane should therefore be protected in some way within 3 months of application. When the membrane is to be backfilled such as with culvert applications, Conwrap should be protected from physical damage by using Impraboard, also available from Parchem. Estimating Supply Conwrap: 150 mm wide, 20 m long roll (other sizes made to order) Emer-Proof Self Adhesive Primer: 4 litre and 20 litre pail Coverage Emer-Proof Self Adhesive Primer: Appox. 6 m²/litre Note: no allowance has been made for wastage. Storage 12 months in original containers stored in cool, dry conditions i.e. not exceeding 25°C. Storage above this temperature may reduce storage life. Conwrap


Technical Dayta Sheet Compedium
To see the actual publication please follow the link above