CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING ROOFING WATERSTOPS WATERPROOFING JOINT FILLERS TIMBER FLOORING ALPHABETICAL Important notice A Safety Data Sheet (SDS) and Technical Data Sheet (TDS) are available from the Parchem website or upon request from the nearest Parchem sales office. Read the SDS and TDS carefully prior to use as application or performance data may change from time to time. In emergency, contact any Poisons Information Centre (phone 13 11 26 within Australia) or a doctor for advice. Product disclaimer This Technical Data Sheet (TDS) summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. You should read this TDS carefully and consider the information in the context of how the product will be used, including in conjunction with any other product and the type of surfaces to, and the manner in which, the product will be applied. Our responsibility for products sold is subject to our standard terms and conditions of sale. Parchem does not accept any liability either directly or indirectly for any losses suffered in connection with the use or application of the product whether or not in accordance with any advice, specification, recommendation or information given by it. INDEX 376 Page 3 *Manufactured and sold under license from Fosroc International Limited. Fosroc and the Fosroc logo are trade marks of Fosroc International Limited, used under license. *Denotes a trade mark of Fosroc International Limited. Parchem Construction Supplies Pty Ltd 7 Lucca Road, Wyong NSW 2259 Phone: 1300 737 787 www.parchem.com.au ABN 80 069 961 968 Distributed in New Zealand by: Concrete Plus Ltd 23 Watts Rd, Sockburn 8042 Ph: 03 343 0090 Fosroc® Thioflex 600 Gun Grade Contract application The designer or contractor may wish to use the services of a specialist sub-contractor for joint sealing work. Names of preferred sub-contractors are available from Parchem. Limitations Over-painting of sealants is not recommended because of the inability of paint films to accept the same degree of movement. However, if painting is mandatory, trials should be carried out to determine the paint compatibility. Thioflex 600 Gun Grade should not be used in direct contact with materials containing pitch or bitumen. Thioflex 600 Gun Grade should not be used in joints in reservoirs or other water retaining structures which may be subject to high chlorination levels or biologically active conditions. Estimating Packaging Thioflex 600 Gun 6 litre pack Grade: Primer 4: 250 ml tin Primer 7: 1 litre can Primer 13: 250 ml pack Solvent 10: 4 and 20 litre drums Guide to quantities Joint size (mm) Litres per metre run Metre run per 4 litre pack 10 x 10 0.1 60 20 x 10 0.2 30 20 x 15 0.3 20 20 x 20 0.4 15 40 x 20 0.8 7.5 40 x 25 1 6 40 x 30 1.2 5.1 40 x 40 1.6 3.6 50 x 25 1.25 5.1 50 x 30 1.5 3.9 50 x 40 2.0 3 50 x 50 2.5 2.4 1 litre of Primer 4 to 100 litres of Thioflex 600 Gun Grade. 1 litre of Primer 7 to 30 litres of Thioflex 600 Gun Grade. 1 litre of Primer 13 to 30 litres of Thioflex 600 Gun Grade. These are theoretical yields. No allowance has been made for variation in joint width or wastage. Storage Storage life of 12 months in original containers when kept in dry conditions between 5°C and 27°C.
Technical Dayta Sheet Compedium
To see the actual publication please follow the link above