Page 371

Technical Dayta Sheet Compedium

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING JOINT FILLERS WATERPROOFING WATERSTOPS ROOFING TIMBER FLOORING ALPHABETICAL INDEX 359 Technical Data Sheet V 1.0 25-07-13 Proseries Acryseal Intumescent Fire & Acoustic Mastic Description Selleys Proseries Acryseal is an acrylic fire and acoustic rated sealant for perimeter and penetration seals in fire rated construction. It is off-white in colour and available in a 600ml sausage. Uses  Non-trafficable control joints in concrete, masonry and brick fire rated construction.  Penetrations and perimeter sealing in plasterboard.  Acoustic sealing Features/Advantages  Fire rated for up to 4 hours  Will not degrade acoustic walls that meet the BCA requirements  Excellent adhesion to most building materials  Paintable  Low odour  Water clean up  Low VOC Instructions for use/Application Instructions The following should only be used as a guide and the installer should apply all Australian Standards, BCA/NZBC requirements, and best practices when using Proseries Acryseal.  Substrates must be clean, dry and free from oil, grease, release agents, dust and loose material.  Insert sausage into sausage gun and snip metal clip from one end.  Attach nozzle and extrude sealant smoothly into joint.  For fire rating, joint width should be between 10mm and 40mm. Minimum joint depth should be 10mm or half the width for joints wider than 20mm.  Install open cell polyurethane backing rod in joint to control sealant depth.  Allow the sealant to form a thick skin before painting with a flexible paint. To avoid paint cracking, the sealant should be allowed to fully cure before painting with flat and/or ceiling paint. Standards Tested  AS1530.5-2005 Fire test in vertical concrete and plasterboard – control joints, penetrations and perimeter seals  ISO9046 Joint movement capability Storage Store unopened sausages below 300C in a cool dry place away from direct sunlight. Unopened sausages can be stored for 24 months from the date of manufacture. Opened sausages may skin and form a lump near the opening. Discard any lumps or skin and remaining product can be used. www.selleystrade.com.au Page 1 of 2


Technical Dayta Sheet Compedium
To see the actual publication please follow the link above