Page 331

Technical Dayta Sheet Compedium

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING JOINT FILLERS WATERPROOFING WATERSTOPS ROOFING TIMBER FLOORING ALPHABETICAL INDEX Important notice A Safety Data Sheet (SDS) and Technical Data Sheet (TDS) are available from the Parchem website or upon request from the nearest Parchem sales office. Read the SDS and TDS carefully prior to use as application or performance data may change from time to time. In emergency, contact any Poisons Information Centre (phone 13 11 26 within Australia) or a doctor for advice. Product disclaimer This Technical Data Sheet (TDS) summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. You should read this TDS carefully and consider the information in the context of how the product will be used, including in conjunction with any other product and the type of surfaces to, and the manner in which, the product will be applied. Our responsibility for products sold is subject to our standard terms and conditions of sale. Parchem does not accept any liability either directly or indirectly for any losses suffered in connection with the use or application of the product whether or not in accordance with any advice, specification, recommendation or information given by it. Page 2 319 *Manufactured and sold under license from Fosroc International Limited. Fosroc and the Fosroc logo are trade marks of Fosroc International Limited, used under license. *Denotes a trade mark of Fosroc International Limited. Parchem Construction Supplies Pty Ltd 7 Lucca Road, Wyong NSW 2259 Phone: 1300 737 787 www.parchem.com.au ABN 80 069 961 968 Distributed in New Zealand by: Concrete Plus Ltd 23 Watts Rd, Sockburn 8042 Ph: 03 343 0090 Fosroc® Hilastic 44 Limitations Elastomeric sealants such as Hilastic 44 should not be applied in close proximity to bituminous materials or products based on reclaimed rubber, as these may contain components which can migrate into the sealant and result in staining or reduced performance. Hilastic 44 uses an acetoxy curing system which releases acetic acid vapour during cure, and so is not recommended for use on concrete, zinc, copper, brass, iron and the core layer of some laminated glasses. Where surfaces may be affected by acetic vapour, other grades of Parchem’ silicone sealants should be used. Hilastic 99 is recommended for use in joint sealing and pointing applications involving concrete or metal surfaces, while Hilastic 66 is recommended for use in kitchens, bathrooms and other humid areas. Hilastic 88 is recommended for lap jointing applications involving Zincalume, Colorbond and other coated steel products. Supply Hilastic 44 is supplied in 300 ml cartridges. Product Code 610302 Hilastic 44 Trans 300g (20/Ctn) Coverage Approximately 15 metres of a 5 mm bead for a 300 ml cartridge or 6 metres of a 5 x 10 mm joint. Storage Shelf life 12 months in original unopened container stored in cool dry conditions.


Technical Dayta Sheet Compedium
To see the actual publication please follow the link above