CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING JOINT FILLERS WATERPROOFING WATERSTOPS ROOFING TIMBER FLOORING ALPHABETICAL INDEX Important notice A Safety Data Sheet (SDS) and Technical Data Sheet (TDS) are available from the Parchem website or upon request from the nearest Parchem sales office. Read the SDS and TDS carefully prior to use as application or performance data may change from time to time. In emergency, contact any Poisons Information Centre (phone 13 11 26 within Australia) or a doctor for advice. Product disclaimer This Technical Data Sheet (TDS) summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. You should read this TDS carefully and consider the information in the context of how the product will be used, including in conjunction with any other product and the type of surfaces to, and the manner in which, the product will be applied. Our responsibility for products sold is subject to our standard terms and conditions of sale. Parchem does not accept any liability either directly or indirectly for any losses suffered in connection with the use or application of the product whether or not in accordance with any advice, specification, recommendation or information given by it. Parchem Construction Supplies Pty Ltd 7 Lucca Road, Wyong NSW 2259 Phone: 1300 737 787 www.parchem.com.au ABN 80 069 961 968 Distributed in New Zealand by: Concrete Plus Ltd 23 Watts Rd, Sockburn 8042 Ph: 03 343 0090 Page 4 265 Aegis® MSP Limitations Do not apply at temperatures below 10°C or above 30°C. Do not apply in hot windy conditions. Aegis MSP is not designed for structural applications. Final properties are not achieved until 28 days after application. Do not wash floors / pavements treated with Aegis MSP for 10 days after application using hot water nor use caustic cleaning solutions for 14 days. Aegis MSP is resistant to many dilute acids and chemicals, however it is possible that Aegis MSP will suffer some surface discolouration under some conditions including the following: • Oil or petrol spills and splashes • Animal or vegetable fats • Beverage spills or splashes (eg. coffee, cola etc.) • Part of treated surface exposed to rain or water spillage • Surfaces exposed to continual dusty conditions Freshly applied Aegis MSP must be protected form rain and other sources of water for at least 24 hours after application. If rain is forecast the application should be delayed. Supply 752001 - Aegis MSP Fine Grey: 20 kg packs 752003 - Aegis MSP Coarse Grey: (containing 1.4 kg liquid and 18.6 kg powder) 750007 - Aegis Surface Primer #1: 20 litre plastic drums Coverage Aegis MSP: 10 litre / 20 kg pack; 5 m² @ 2 mm thick Aegis Surface Primer #1: 5 m² / litre depending on surface porosity Shelf life 12 months if kept in a dry store in the original, unopened packs.
Technical Dayta Sheet Compedium
To see the actual publication please follow the link above