Page 249

Technical Dayta Sheet Compedium

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING JOINT FILLERS WATERPROOFING WATERSTOPS ROOFING TIMBER FLOORING ALPHABETICAL INDEX Technical Data Sheet manufactured under modern process are as close as possible to samples available. However, it should be noted that no guarantee can be given of exact colour matching. An on-site trial should be carried out to ensure that the correct grade of grit is chosen so that the required degree of skid resistance and aesthetic appearance is obtained. Consult Parchem when alternative specialised grits are required. Design Criteria Durafloor FC is designed for application in two coats to achieve an approximate total dry film thickness of 400-450 microns. Substrates should be dry and not suffer, or be likely to suffer, from rising damp. If necessary, suitable damp-proof membranes should be installed to prevent this. Substrates should not have a relative humidity greater than 80% at the time of installation. Properties The values given below are average figures achieved in laboratory tests. Actual values obtained on-site may show minor variations from those quoted. Physical properties 237 Durafloor® FC Floor / wall coating, solvent free epoxy, fast cure Uses A heavy duty, 100% solids, non-skid surface coating for concrete and steel floors that is attractive and easily cleaned. Highly resistant to chemical attack and the action of vehicular and foot traffic. Suitable for use in wet areas where strict levels of hygiene and cleanliness are required or where chemicals are manufactured, spilled or are an integral part of the process. Used in the food and chemical industry, hospitals, schools, kitchens and many other installations. Specially selected and processed grades of quartz sand anti-slip grits are available to make safe all types of working areas for both personnel and plant. Durafloor FC may be used without non-skid grit as a coating on epoxy floor screeds or as a high quality protective coating for walls, coves, drains, etc. Advantages „ 100% solids - high-build, solvent free floor coating suitable for application in confined areas or where volatile emissions are of concern „ Special fast cure - allowing rapid plant turnaround „ Chemically resistant - good resistance to a wide range of industrial chemicals „ Non-slip - provides safety for plant and personnel „ Economical - long lasting, easily maintained, saves on cleaning and maintenance costs „ Hygienic - does not support the growth of germs or bacteria „ Attractive - available in a wide range of colours to enhance the working environment Technical Support Parchem offers a technical support package to specifiers, end-users and contractors, as well as on-site technical assistance. Description Durafloor FC is a three-component solvent-free epoxy resin treatment consisting of base, hardener and colour pack. The formulation was chosen to allow the incorporation of non-skid grits and provide a high degree of chemical and abrasion resistance. The finished floor is a semi gloss textured surface coloured to individual requirements. It has excellent adhesion qualities, is impervious and easily cleaned. Durafloor FC is available in a range of colours. NB: Care has been taken to ensure that colours January 2014 Page 1 @ 20°C @ 35°C Pot life: 25 - 30 mins 10 - 15 mins Time between 3 - 12 hours 2 - 12 hours coats: Cure time - foot traffic: vehicular traffic: chemical: 6 hours 12 hours 4 days 4 hours 10 hours 4 days Dry film thickness (2 coats): 400 microns (approx) Line-marking paint adhesion to coating: Dulux Roadmaster A1 Dulux Roadmaster A2 Excellent Excellent January 2014


Technical Dayta Sheet Compedium
To see the actual publication please follow the link above