Page 189

Technical Dayta Sheet Compedium

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING JOINT FILLERS WATERPROOFING WATERSTOPS ROOFING TIMBER FLOORING ALPHABETICAL INDEX Important notice A Safety Data Sheet (SDS) and Technical Data Sheet (TDS) are available from the Parchem website or upon request from the nearest Parchem sales office. Read the SDS and TDS carefully prior to use as application or performance data may change from time to time. In emergency, contact any Poisons Information Centre (phone 13 11 26 within Australia) or a doctor for advice. Product disclaimer This Technical Data Sheet (TDS) summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. You should read this TDS carefully and consider the information in the context of how the product will be used, including in conjunction with any other product and the type of surfaces to, and the manner in which, the product will be applied. Our responsibility for products sold is subject to our standard terms and conditions of sale. Parchem does not accept any liability either directly or indirectly for any losses suffered in connection with the use or application of the product whether or not in accordance with any advice, specification, recommendation or information given by it. Parchem Construction Supplies Pty Ltd 7 Lucca Road, Wyong NSW 2259 Phone: 1300 737 787 www.parchem.com.au ABN 80 069 961 968 Distributed in New Zealand by: Concrete Plus Ltd 23 Watts Rd, Sockburn 8042 Ph: 03 343 0090 Page 3 177 Emer-Stop Creme Post application testing During or on completion of the works the client will mark areas to be tested for depth of penetration by testing at a minimum rate of one core per 300 m² of treated concrete. Emer-Stop Creme freshly applied 30 minutes after application 2 hours after application Cleaning Emer-Stop Creme should be removed from tools, equipment and mixers with clean water immediately after use. Limitations Emer-Stop Creme may hydrolyse with atmospheric moisture. Material from opened containers should be used within 48 hours or discarded. Note: Emer-Stop Creme is designed for application to atmospherically exposed concrete and is not suitable in submerged or semi-submerged applications. Please note that the impregnation depth is influenced by several factors, e.g. formulation, humidity and porosity of the concrete as well as the level of surface preparation undertaken. In certain circumstances the penetration will not reach the levels that are expected due to one or more of the above factors. Estimating Supply 555170: 200 litre drum 555180: 30 litre (25kg kit) Coverage and yield Emer-Stop Creme: 0.25 - 0.44 litres/ m² per coat 4.00 - 2.25 m² / litre per coat Note: these coverage figures are theoretical. Generally only one coat is required, depending on the absorbency of the substrate. Storage Emer-Stop Creme has a shelf life of at least 12 months, if stored in tightly closed original containers between 0°C and 30°C. The “Best use before” date on each lot is shown on the product label.


Technical Dayta Sheet Compedium
To see the actual publication please follow the link above