Page 161

Technical Dayta Sheet Compedium

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING JOINT FILLERS WATERPROOFING WATERSTOPS ROOFING TIMBER FLOORING ALPHABETICAL INDEX Technical Data Sheet 149 A free flowing, water displacing epoxy grout for underwater grouting applications Uses Free flowing grout where the mechanical properties of the hardened grout must be of the highest order. Conbextra EP935 is suitable for underwater grouting work and for the repair of water immersed concrete structures. Advantages „ Excellent adhesion to water immersed concrete, masonry or brick surfaces „ High density ensures complete water displacement „ High compressive, tensile and flexural strengths „ Cures with negligible shrinkage „ Pre-measured components allow easy mixing, and free flowing properties ensure speed of application Description Conbextra EP935 is a two component, finely filled, low viscosity, epoxy resin grout. Its high density displaces water to enable high performance underwater suitability. The components of Conbextra EP935 are supplied in the correct mix proportions designed for whole pack mixing so that flow and mechanical properties are consistant. Technical support Parchem offers a comprehensive range of high performance, high quality construction products. In addition, the company offers a technical support package to specifiers and contractors as well as technical advice from staff experienced in the construction industry. Properties Colour: Base resin is black and January 2010 Page 1 the hardener is an amber liquid. When mixed correctly they produce a grey liquid Mixing proportions by volume: As supplied Mixing proportions by weight: 7.5 base to 1 hardener Mixed specific gravity: Approx. 2.0 Minimum application 5°C temperature: Pot life: at 20°C (1kg mix) 60 minutes Note: pot life will be reduced when greater quantities than 1kg are mixed or when working temperatures are higher Compressive strength: 24 hours 50 MPa 7 days 90 MPa Note: Compressive strengths stated above were measured using cube samples. Test results obtained will vary if testing is carried out to an alternative standard or sample dimensions are used. Specification clauses Supplier specification All grouting (specify details and areas of application) must be carried out using Conbextra EP935 manufactured by Parchem and applied strictly in accordance with the manufacturer’s technical data sheet. Product to be installed by a recognised contractor nominated by the supplier. Fosroc® Conbextra EP935 January 2010


Technical Dayta Sheet Compedium
To see the actual publication please follow the link above