CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING TIMBER FLOORING ROOFING WATERSTOPS WATERPROOFING JOINT FILLERS ALPHABETICAL Important notice A Safety Data Sheet (SDS) and Technical Data Sheet (TDS) are available from the Parchem website or upon request from the nearest Parchem sales office. Read the SDS and TDS carefully prior to use as application or performance data may change from time to time. In emergency, contact any Poisons Information Centre (phone 13 11 26 within Australia) or a doctor for advice. Product disclaimer This Technical Data Sheet (TDS) summarises our best knowledge of the product, including how to use and apply the product based on the information available at the time. You should read this TDS carefully and consider the information in the context of how the product will be used, including in conjunction with any other product and the type of surfaces to, and the manner in which, the product will be applied. Our responsibility for products sold is subject to our standard terms and conditions of sale. Parchem does not accept any liability either directly or indirectly for any losses suffered in connection with the use or application of the product whether or not in accordance with any advice, specification, recommendation or information given by it. INDEX 88 Page 3 Parchem Construction Supplies Pty Ltd 7 Lucca Road, Wyong NSW 2259 Phone: 1300 737 787 www.parchem.com.au ABN 80 069 961 968 Distributed in New Zealand by: Concrete Plus Ltd 23 Watts Rd, Sockburn 8042 Ph: 03 343 0090 Galvashield® XP Range Supply Galvashield XP 20 units per box 5.2 kg Galvashield XPT 30 units per box 6.4 kg Galvashield XP2 20 units per box 5.9 kg Galvashield XP4 20 units per box 9.5 kg Storage Store in dry conditions in the original unopened box. Avoid extremes of temperature and humidity. Shelf life 12 months. Health and Safety As with all cement-based materials, contact with moisture can release alkalis which may be harmful to exposed skin. Galvashield XP should be handled with suitable gloves and other personal protective equipment in accordance with standard procedures for handling cementitious materials. Additional safety information is included in the Material Safety Data Sheet. Design Criteria Maximum Anode Spacing for Low to Moderate Corrosion Risk (Chloride Content < 0.8% or Carbonated Concrete) Protection Level Corrosion Prevention Corrosion Control Galvashield Anode XP or XPT XP2 XP4 Steel Density Ratio Anode spacing (mm) Anode spacing (mm) Anode spacing (mm) <0.3 750 750 750 0.31 - 0.6 600 700 700 0.61 - 0.9 500 650 550 0.91 - 1.2 450 550 450 1.21 - 1.5 400 500 425 1.51 - 1.8 350 450 375 1.81 - 2.1 3 300 425 350 Maximum Anode Spacing for High Corrosion Risk (Chloride Content 0.8% to 1.5%) Protection Level Corrosion Prevention Corrosion Control Galvashield Anode XP or XPT XP2 XP4 Steel Density Ratio Anode spacing (mm) Anode spacing (mm) Anode spacing (mm) <0.3 600 750 600 0.31 - 0.6 500 600 500 0.61 - 0.9 400 500 400 0.91 - 1.2 350 450 350 1.21 - 1.5 250 400 250 1.51 - 1.8 200 350 200 1.81 - 2.1 175 300 150 For extremely high corrosion risk applications (> 1.5% Chloride), contact Parchem for assistance. Note: Chloride content is based on percent by weight of cement. *Maximum grid dimensions are based on typical conditions. Spacing should be reduced as appropriate for severe environments or to extend the expected service life of the anode.
Technical Dayta Sheet Compedium
To see the actual publication please follow the link above