Page 51

32857 Parchem Technical Data Compendium 2015_Crop4emag.pdf

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING JOINT FILLERS WATERPROOFING WATERSTOPS ROOFING TIMBER FLOORING ALPHABETICAL INDEX 39 Limitations Patchroc GP should not be used when the temperature is below 5°C and falling. Patchroc GP should not be used when temperature is above 35°C. Do not mix part bags. The product should not be exposed to moving water during application. Exposure to heavy rainfall prior to the final set may result in surface scour. If any doubts arise concerning temperature or substrate conditions, consult your local Parchem sales office. Supply 402070 Patchroc GP 20 kg Nitoprime Zincrich: 1 litre can Nitobond AR: 5 and 20 litre containers Durafloor Level Prime: 1, 5 and 20 litre containers Solvent 10: 4 and 20 litre cans Coverage and yield Patchroc GP: Approximately 10.0 litres / 20 kg bag (0.5 m² at 20 mm thickness) Nitoprime Zincrich: 7 m² / litre (approx.) Nitobond AR: 6 - 8 m²/litre Durafloor Level Prime: 6 - 8 m²/litre Note: the actual yield per bag of Patchroc GP will depend on the consistency used (refer mixing table). The coverage figures for liquid products are theoretical - due to wastage factors and the variety and nature of possible substrates, practical coverage figures will be reduced. Specification Clause Refer to Parchem website for detailed specification clauses. (www.parchem.com.au) Storage Shelf life All products have a shelf life of 12 months if kept in a dry store in the original, unopened bags or packs. Storage conditions Store in dry conditions in the original, unopened bags or packs. If stored at high temperatures and/or high humidity conditions the shelf life may be reduced to 4 - 6 months. Nitobond AR and Durafloor Level Prime should be protected from frost. Fosroc® Patchroc GP


32857 Parchem Technical Data Compendium 2015_Crop4emag.pdf
To see the actual publication please follow the link above