CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING ROOFING WATERSTOPS WATERPROOFING JOINT FILLERS TIMBER FLOORING ALPHABETICAL Fosroc® Renderoc G Limitations Renderoc G should not be used when the temperature is below 5°C and failing. Do not mix part bags. Due to the lightweight nature of Renderoc G, the product should not be used in areas subjected to traffic. Neither should it be exposed to moving water during application. Exposure to heavy rainfall prior to the final set may result in surface scour. If any doubts arise concerning temperature or substrate conditions, consult your local Parchem sales office. Estimating Supply Renderoc G: 20 kg bag Nitoprime Zincrich: 1 litre can Nitbond HAR: 1, 5 and 20 litre containers Nitobond AR: 1, 5 and 20 litre containers Nitobond EP: 1.5 and 6 litre packs Solvent 10: 4 and 20 litre cans Coverage and yield Renderoc G: Approximately 10 litres/20 kg INDEX 36 bag (approximately 1.0 m² at 10 mm thickness) Nitoprime Zincrich: 8 m²/litre (approx.) Nitoprime HAR: 3 - 4 m²/litre (approx.) Nitobond AR: 6 - 8 m²/litre Nitobond EP: 4 - 5 m²/litre Note: the actual yield per bag of Renderoc G will depend on the consistency used. The yield will be reduced if the material is applied by a spray technique. The coverage figures for liquid products are theoretical - due to wastage factors and the variety and nature of possible substrates, practical coverage figures will be reduced. Shelf Life All products have a shelf life of 12 months if kept in a dry store in the original, unopened bags or packs. Storage Conditions Store in dry conditions in original, unopened bags or packs. If stored at high temperatures and/or high humidity conditions the shelf life may be reduced to 4 to 6 months. Nitobond HAR and Nitobond AR to be protected from frost.
32857 Parchem Technical Data Compendium 2015_Crop4emag.pdf
To see the actual publication please follow the link above