Page 471

32857 Parchem Technical Data Compendium 2015_Crop4emag.pdf

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING JOINT FILLERS WATERPROOFING WATERSTOPS ROOFING TIMBER FLOORING ALPHABETICAL INDEX Technical Data Sheet 459 Emer-Proof®(FRÀH Anti-Root Polymer modified bitumen liquid coating with plant root inhibitors Uses „ Planter boxes „ Garden beds „ Retaining walls, underground waterproofing „ General areas in contact with soil, plants „ Protective coating over bituminous sheet membranes in underground areas Advantages „ Anti-root properties to inhibit plant root penetration in earth filled applications „ Low VOC „ Outstanding adhesion properties to primed surfaces „ Able to be applied to damp surfaces (free of surface water) „ Does not re-emulsify once cured „ Flexible „ Solvent free, non-flammable and user friendly „ Australian Made Description Emer-Proof Ecoflex Anti-Root is a polymer modified bituminous liquid coating that contains root inhibitors to prevent the penetration of root growth through the cured membrane surface. Designed for use in conjunction with either Emer-Proof Ecoflex or Emer-proof Quick-Dry Two Part in subterranean areas such as planters, retaining walls, garden beds or general areas exposed to earth and soil. Water based and solvent free, Emer-Proof Ecoflex Anti-Root has excellent adhesion properties to many bituminous sheet membrane surfaces*. Able to be used in high build applications by roller, spatula or trowel on vertical and horizontal surfaces. *Sheet membrane surfaces vary, therefore adhesion compatibility tests are recommended. Technical Support Parchem offers a comprehensive range of high performance, high quality waterproofing and construction products. In addition, Parchem offers a technical support package to specifiers, contractors and end-users, as well as on-site technical assistance. Properties Data quoted is typical for this product, but does not constitute a specification. Solids: 70% Colour: Black/ Charcoal - Wet, Black - Dry Tensile strength: 0.5 MPa Water vapour transmission 1.35g/24h/m² Shore A hardness 58 Elongation: >330% Coverage Emer-Proof Ecoflex Anti-Root should be applied as a final coat over either Emer-Proof Ecoflex or Quick-Dry Two Part. Refer to their repective TDS for application instructions. Emer-Proof Ecoflex Anti-Root should be applied to achieve a dry film thickness of 0.7-1.0 mm. Approximate total coverage: 1L/m², applied at a minimum of 2 coats. Dry Film Thickness = 0.7 - 1.0 mm Specification Clause Where required, a water based bituminous rubberised liquid coating, containing root inhibitors, is to be applied to offer a waterproof area. The coating must be low VOC, Australian made and non-toxic. The Emer-Proof Ecoflex Anti-Root from Parchem Construction Supplies meet the performance criteria and is an approved product. Design Criteria All cracks >2mm must be suitably prepared and primed according to the substrate with either, Emer-Proof Multi- Purpose Primer and Additive for porous and Emer-Proof Non-Porous Primer for non-porous substrates. The Emer-Proof Elastic Joint Band System should be installed first in accordance with the Technical Data Sheet for the system. The stirred Emer-Proof Ecoflex Anti-Root is laid onto the surface continually in one direction and each successive coat should be applied perpendicular to the previous coat. Allow 2-4 hours for film to dry between coats, use 2 coats to achieve the required dry film thickness and a uniform coverage. Emer-Proof Ecoflex Anti-Root should be protected from mechanical damage with Impraboard, or Emer-proof Drain V drainage and protection sheet, available from Parchem. April 2014


32857 Parchem Technical Data Compendium 2015_Crop4emag.pdf
To see the actual publication please follow the link above