Page 452

32857 Parchem Technical Data Compendium 2015_Crop4emag.pdf

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING ROOFING WATERSTOPS WATERPROOFING JOINT FILLERS TIMBER FLOORING ALPHABETICAL INDEX 440 Technical Data Sheet Emer-Proof® Quick Dry Two Part Polymer / cementitious two part waterproofing membrane Uses Emer-Proof Quick Dry Two Part is suitable for a wide range of waterproofing applications such as: „ Podiums, terraces, balconies, and deck areas – under toppings, tiles and other protected environments „ Wet areas and showers – Class II Membrane System „ Foot trafficable exposed roof top membrane (when overcoated with Emer-Proof Top Coat) „ Foot trafficable exposed balcony decks (when overcoated with Emer-Proof Top Coat) „ Foot trafficable exposed walkways, subject to regular density foot traffic (when over-coated with Emer-Proof Top Coat) „ Water tanks, water storage areas, including potable conditions (sand / cement slurry priming with Emer-Proof Multi-Purpose Primer and Additive is essential when applying in submerged applications) „ Tiled pools & water features (sand / cement slurry priming with Emer-Proof Multi-Purpose Primer and Additive is essential when applying in submerged applications) „ Foundation waterproofing applications „ Suitable for subterranean areas such as retaining walls Advantages „ Low VOC „ Solvent free, non hazardous „ Handles ponding and permanently wet conditions (will not re-emulsify once fully cured) „ Tough and flexible with good elongation properties „ Compatible bonding properties for Emer-Proof Tilebond Flex adhesive „ Suitable for internal and external surfaces „ Has a high shore A hardness „ Australian made Standards Compliance Emer-Proof Quick Dry Two Part meets the requirements of: „ AS/NZS 4858:2004 Wet Area Membrane as a Class II membrane „ AS3740:2010 Waterproofing of Wet Areas Within Residential Buildings „ AS/NZS 4020:2005 Testing of Products for Use in Contact with Drinking Water Description Emer-Proof Quick Dry Two Part is a water based, fast drying, flexible two component, polymer modified cementitious waterproofing membrane designed for podiums, terraces, balconies, and deck areas – under toppings, tiles and other protected environments. It may also be used for foot trafficable exposed roof top membranes (when overcoated with Emer-Proof Top Coat) and foot trafficable exposed balcony decks (when overcoated with Emer-Proof Top Coat). Emer-Proof Quick Dry Two Part offers excellent adhesion properties over primed building substrates including Scyon sheeting, CFC, wet area timber, ceramic tile, metals, plastics, concrete, masonry, renders, cement sheeting, wet area sheet surfaces and plaster board surfaces (once correctly primed and prepared). It possesses excellent low water vapour transmission properties and fully compatible with polymer modified cement based tiles adhesives, screeds and renders. Technical Support Parchem offers a comprehensive range of high performance, high quality waterproofing and construction products. In addition, Parchem offers a technical support package to specifiers, contractors and end-users, as well as on-site technical assistance. Properties Data quoted is typical for this product, but does not constitute a specification. Properties of wet membrane Specific gravity of 1.25kg / litre (20 litres per 25kg kit) mixed product: Appearance: Liquid Powder Mixed Blue Sandy/Grey Blue Properties of cured membrane Elongation: >245% Tensile Strength: >1.1 MPa Adhesion to concrete (primed): >1.7 MPa Water Vapour Transmission: 0.45g/24h/m² Shore A Hardness: 87 Colour: Blue Coverage Emer-Proof Quick Dry Two Part is designed to be applied by brush, roller or spray. In general wet area applications, Emer-Proof Quick Dry Two Part is applied as two (2) coats with a minimum total coverage of 1.5 ltr / m². April 2014


32857 Parchem Technical Data Compendium 2015_Crop4emag.pdf
To see the actual publication please follow the link above