Page 346

32857 Parchem Technical Data Compendium 2015_Crop4emag.pdf

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING ROOFING WATERSTOPS WATERPROOFING JOINT FILLERS TIMBER FLOORING ALPHABETICAL INDEX 334 Technical Data/Properties Contact Selleys before using this data for the setting of specifications. Property Typical Result Colour Grey Density 1.26 Technology Solvent based copolymer Shelf Life 24 months Skin time 3 mins @ 25C Tack free time 20 mins @ 25C 90 mins @ 5C Shore A Hardness 45 Elongation at Break (ASTM D412) 500% Tensile Strength (ASTM D412) 96kPa Modulus @ 100% extension (ASTM D412) 176kPa Recovery (ASTM D412) 58% Joint Movement Capability +/-10% VOC 370g/L Important Notes/Limitations x Not an elastomeric compound, it should not be used in joints subject to considerable dynamic movement. x Should not be used in an enclosed space or without adequate ventilation. x May not adhere to some wet absorbent surfaces, or to some old (heavily oxidised) wet metals. x Not recommended for permanent water immersion or potable water. x Blockade cures relatively slowly (0.1mm per day). x Blockade will not adhere through frost or ice. x It is recommended to first undercoat with a premium water based undercoat. x Allow at least half an hour cure before painting. x Some water-based paints may exhibit poor wetting properties when painted onto Blockade. If poor wetting occurs simply wash sealant surface with soapy water then rinse and dry before painting. Safety Classified as hazardous ± contains Hydrocarbon solvents Wear gloves and safety glasses when using. Classified as Dangerous Goods ± Class 3 Flammable Liquid Refer to Safety Data Sheet for more detailed information. Disclaimer All information contained in this Product Information Sheet is as accurate and up-to-date as possible. Products can be expected to perform as indicated in this Sheet, so long as application procedures are followed as recommended. Notwithstanding the above, any recommendations made by Selleys or its distributors in relation to this or other products is to be taken as advice only. Selleys makes no representations or warranties that this product will be suitable for use. Subject to any applicable legislation which cannot be excluded (such as the Australian Consumer Law), Selleys takes no responsibility and will not be liable for any failure in performance of this product or any losses, damages, or injuries (consequential or otherwise) arising from the storage, mixing, application or other use of this product or for any representations made by you about the product which have not been approved in writing by Selleys. The buyer assumes all risk and responsibility for the use of this product. © 2013 Selleys Pty Limited Selleys ± a division of DuluxGroup Australia Pty Ltd 1 Gow Street, Padstow, NSW 2211 1300 555 205 (Australia) 0800 735 539 (New Zealand)


32857 Parchem Technical Data Compendium 2015_Crop4emag.pdf
To see the actual publication please follow the link above