Page 245

32857 Parchem Technical Data Compendium 2015_Crop4emag.pdf

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING JOINT FILLERS WATERPROOFING WATERSTOPS ROOFING TIMBER FLOORING ALPHABETICAL INDEX Technical Data 'XUDÀRRU® HP Sheet 233 Floor / wall coating, high performance epoxy, solvent free, non-tainting Uses A heavy duty, industrial / commercial coating for concrete floors and walls that is attractive and easily cleaned. Highly resistant to chemical attack and the action of forklift vehicular and commercial type traffic. When used in conjunction with the appropriate slip resistant medium, Durafloor HP is suitable for use in wet areas where strict levels of hygiene and cleanliness are required or where chemicals are manufactured, spilled or are an integral part of the process. Used in the food and chemical industry, hospitals, schools, kitchens, high traffic applications and many other installations. Specially selected and processed grades of quartz sand anti-slip grits are available to make safe all types of working areas for both personnel and plant. Durafloor HP may be used without anti-slip grit as a sealer on concrete floors, epoxy floor screeds or as a high quality protective coating for walls, coves, drains, etc and is readily available in a range of colours. Durafloor HP can also be used as a slip resistant finish over Durafloor SL / SLX. Advantages „ Long lasting and easily maintained with good resistance to many industrial chemicals „ Slip resistance improves safety for plant and personnel „ Certified ‘non-taint’ around food stuffs during and after installation „ Provides an attractive satin finish „ Available in a wide range of light reflective colours to provide a brighter work area „ Available in a fast cure version (Durafloor FC) „ Complies with BCA, for building material fire hazard properties specification C1.10a for critical radiant flux and smoke development rate values. Description Durafloor HP is a multi-component solvent-free epoxy resin high build coating. The formulation allows the incorporation of anti-slip grits and provides good chemical and abrasion resistance. Durafloor HP is available in a range of colours by adding Durafloor Colour Packs. NB: Care has been taken to ensure that colours manufactured under our modern process are as close as possible to agreed reference samples. However, it should be noted that no guarantee can be given of exact colour matching. An on-site trial should be carried out to ensure that the correct grade of grit is chosen so that the required degree of slip resistance and aesthetic appearance is obtained. Consult Parchem when alternative specialised grits are required. Technical Support Parchem offers a technical support package to specifiers, end-users and contractors, as well as on-site technical assistance. Design Criteria Durafloor HP is designed for application in two coats to achieve an approximate total dry film thickness of 400 - 500 microns (200 - 250 microns per coat) on floors and 150 - 200 microns on walls (75-100 microns per coat). For thicker applications, above the standard film thickness, to avoid sag and curtaining on vertical surfaces, Durafloor Thickener can be added to Durafloor HP. Achievable film thickness will vary depending on environmental conditions. Typically 150 -200 microns per coat. Substrates should be dry and not suffer, or be likely to suffer, from rising damp. Substrates should not have a relative humidity greater than 80% at the time of installation (refer Limitations section). January 2014


32857 Parchem Technical Data Compendium 2015_Crop4emag.pdf
To see the actual publication please follow the link above