Page 226

32857 Parchem Technical Data Compendium 2015_Crop4emag.pdf

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING ROOFING WATERSTOPS WATERPROOFING JOINT FILLERS TIMBER FLOORING ALPHABETICAL Fosroc® Cemtop GP Advanced If the surface onto which Cemtop GP Advanced is applied moves or cracks, reflective cracking may occur. The recommended application temperature range is 10°C to 35°C. If site conditions are outside of this range please consult Parchem for advice. Estimating Supply 430088 - Cemtop GP Advanced: 18 kg bag 480005 - Durafloor Level Prime: 1 litre 480016 - Durafloor Level Prime: 5 litre 480017 - Durafloor Level Prime: 20 litre Coverage/Yield: Cemtop GP Advanced: INDEX 214 Water Addition per 18Kg Bag Approximate Yield per 18Kg Bag Approximate Coverage per 18Kg Bag 3.6L 10.5L 1m² @ 10.5mm thick 3.85L 10.8L 1m² @ 10.8mm thick When substrate temperatures will be below 15°C prior to the product’s initial set, Cemtop GP Advanced must be mixed at the low end of the recommended water addition rate, i.e. 3.6 litres of water per 18kg bag. Durafloor Level Prime: 10 - 20 m²/litre (after dilution with clean water as specified) The coverage figures given are theoretical - due to wastage factors and the variety and nature of possible substrates, practical coverage figures will be reduced. Specification Clause Refer to Parchem website for detailed specification clauses. (www.parchem.com.au) Storage Cemtop GP Advanced should be stored on pallets in dry conditions. Under these conditions the product will have a shelf life of 12 months. Durafloor Level Prime has a shelf life of 18 months if stored at 20°C and protected from frost and extreme heat.


32857 Parchem Technical Data Compendium 2015_Crop4emag.pdf
To see the actual publication please follow the link above