CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING JOINT FILLERS WATERPROOFING WATERSTOPS ROOFING TIMBER FLOORING ALPHABETICAL INDEX 201 Emer-Patch (smooth) Priming Parchem manufacture a range of primer/sealer coatings for use with the Emer range of protective and decorative coatings. Emer-Acrylic Sealer, a water borne acrylic latex primer used for concrete, masonry, rendered or other cementitious surfaces. Emer-Coat Clear Sealer, a solvent borne penetrating sealer used for fibre cement sheeting, previously painted surfaces etc. Movement joints All expansion and movement joints should be sealed with a suitable sealant. Consult the local Parchem sales branch for advice on the method best suited to your application. Emer-Patch (smooth) should not be used over joints subject to movement. Application Emer-Patch (smooth) is applied by steel trowel or putty knife to a maximum thickness of 4 mm per coat and then after suitable curing, additional coat/s may be applied. For exterior application or where large pockets or broad areas are to be filled, the addition of cement slurry is required as follows: Mix 2 parts cement with 1 part water by volume. To make the slurry: mix 1 part slurry with 4 parts Emer-Patch (smooth) by volume. Note: not suitable for surfaces subject to hydrostatic pressure or constant wetting. Cleaning Tools and equipment should be cleaned with water immediately after use. Note: as with all specialty coatings we recommend that the application be carried out by an applicator who is skilled in the procedures and techniques necessary to achieve the desired finish. Supply Emer-Patch (smooth): P/Code: 773003 - 15 litre Emer-Acrylic Sealer: P/Code: 561452 - 4 litre P/Code: 561785 - 15 litre Emer-Coat Clear Sealer: P/Code: 561017 - 1 litre P/Code: 561018 - 4 litre P/Code: 561302 - 20 litre Coverage Emer-Patch (smooth): 5 m² x 3 mm deep / 15 litre Emer-Acrylic Sealer: 12 m² / litre / coat Emer-Proof Aquabarrier: 6 m² / litre / coat Emer-Coat Clear Sealer: 7 m² / litre / coat The coverage figures are theoretical - due to wastage factors and the variety and nature of possible substrates, practical coverage figures may vary accordingly. Storage All products have a shelf life of 12 months if kept in a dry, cool storage area. Storage conditions Store in dry conditions at temperatures between 5°C and 30°C in the original, unopened containers. If stored at high temperatures, the shelf life may be reduced.
32857 Parchem Technical Data Compendium 2015_Crop4emag.pdf
To see the actual publication please follow the link above