Page 189

32857 Parchem Technical Data Compendium 2015_Crop4emag.pdf

CONTENTS CONCRETE REPAIR CORROSION CONTROL GROUTS & ANCHORS PROTECTIVE COATINGS INDUSTRIAL FLOORING SURFACE TREATMENTS JOINT SEALANTS CONCRETE JOINTING JOINT FILLERS WATERPROOFING WATERSTOPS ROOFING TIMBER FLOORING ALPHABETICAL INDEX 177 Emer-Stop Creme Post application testing During or on completion of the works the client will mark areas to be tested for depth of penetration by testing at a minimum rate of one core per 300 m² of treated concrete. Emer-Stop Creme freshly applied 30 minutes after application 2 hours after application Cleaning Emer-Stop Creme should be removed from tools, equipment and mixers with clean water immediately after use. Limitations Emer-Stop Creme may hydrolyse with atmospheric moisture. Material from opened containers should be used within 48 hours or discarded. Note: Emer-Stop Creme is designed for application to atmospherically exposed concrete and is not suitable in submerged or semi-submerged applications. Please note that the impregnation depth is influenced by several factors, e.g. formulation, humidity and porosity of the concrete as well as the level of surface preparation undertaken. In certain circumstances the penetration will not reach the levels that are expected due to one or more of the above factors. Estimating Supply 555170: 200 litre drum 555180: 30 litre (25kg kit) Coverage and yield Emer-Stop Creme: 0.25 - 0.44 litres/ m² per coat 4.00 - 2.25 m² / litre per coat Note: these coverage figures are theoretical. Generally only one coat is required, depending on the absorbency of the substrate. Storage Emer-Stop Creme has a shelf life of at least 12 months, if stored in tightly closed original containers between 0°C and 30°C. The “Best use before” date on each lot is shown on the product label.


32857 Parchem Technical Data Compendium 2015_Crop4emag.pdf
To see the actual publication please follow the link above